Using reverse osmosis technologies with
deionization can actually remove 99.99% of
contaminants found in water and provide people
with perfect drinking water. Only this
combination of technologies can ensure absolute
purity and produce highest quality pure water.
Deionization
(DI)
filters
Deionization (DI) filter takes the full size RO
to a higher level of filtration. It is an
excellent filter, especially those who live in
areas with exceptionally high levels of TOTAL
DISSOLVED SOLIDS (TDS)
in their tap water. The post deionizer takes
the small percentage of contaminants that the
membrane could not remove and filters this to
greater than 99.99% pure. It will give you 0 ppm
TDS, Conductivity attainable less than 0.1uS/cm
or resistivity of close to 18 meg.ohm
PurePro number one quality you can always count on
!
Since we introduced the EC Series to our
customers, the respond has been incredible
success. EC106DI
provides safe, pure water using reverse osmosis
technology. We don't know of any other system at
our price that can approaches its performance.
EC106DI comes complete
with a NSF certified 3.2 gallons water storage
tank, USA made membrane and all the necessary
fittings, installation kits, extra color 1/4"
tubing, and a long-reach chrome faucet.
Features:
3.2 Gallons NSF Standards Water Storage Tank.
FDA Approved Polypropylene Made Flat Cap Housing
(double o'ring).
Automatic Shut-off Valve, Mini Flow Restrictor,
Stainless Steel Check Valve.
Long Reach Chrome Faucet (Upgrade Faucet is
acceptable)
Feed water connector.
Drain Saddle Valve.
Four Color Coded 1/4 inch Tubing for System
Connection
Completely Assembled
100% Factory Tested and Sterilized Ready for
Installation.
Installation Instruction.
EC106R-P CARTRIDGE FILTERS
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in
removing dirt, rust and sand particles.
(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color.
(Stage 3) 1 Micron Sediment Filter :
With only 1 micron rating, provides effective
filtration to protect your membrane. It provides
for improved membrane performance up to 95% of TDS
rejection.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane
that processes 50 gallons per day. It remove the
following hard water contaminants that may be
present in your water: lead, cooper, barium,
chromium, mercury, sodium, cadmium, fluoride,
nitrite, nitrate, and selenium.
(Stage 5) Post Carbon filter:
This carbon post filter removes objectionable
tastes and odors to enhance the quality of your
drinking water. We are using NSF approved post
carbon to guarantee the taste of water.
(Stage 6)
Deionization
(DI)
filters:
Produce 99.99% pure water by simply attaching this
convenient deionization filter with RO unit.
Convenient post RO filtration DI unit (RO/DI unit)
provides crucial supplemental filtration to remove
most impurities for pure polished product water.
Excellent in areas with hard water. Produce 99.99%
pure water. It will give you 0 ppm TDS,
Conductivity attainable less than 0.1uS/cm or
resistivity of close to 18 meg.ohm
--------------------------------------------------------------------------------
Specifications:
Membrane: 50 GPD / 189 LPD
Operation pressure: 50 -100 psi
Dimensions: (cm) 37 (L) x 48(H) x 20 (W) - system
(cm) 28 (L) x 28(W) x 35 (H)- tank
Weight: 9 kg - system
4 kg - tank
