PurePro® Aquarium RO/DI Systems
|
Aquarium RO/DI system
Small in size, but big in capacity. Perfect for large aquariums.
Designed for commercial and residential. Using Reverse Osmosis
Technologies. No equipment is more effective in helping create
ideal water conditions as Reverse Osmosis (RO) units. These
units filter out up to 99% of chemicals found in tap water by
forcing tap water through a semi-permeable membrane that removes
90-99% of tap water impurities.
Unlimited Direct Flow
Enjoy an unlimited flow of fresh purified water with the PurePro
FS8000-Direct Flow RO/DI system. System is equipped with high
flow booster pump for increased water production capacity. It is
perfect for areas with low water pressure. Integrated diaphragm
pump increases water pressure to maximize production without
having to purchase a separate RO pump.
Deionization (DI) filters
De-mineralize filter takes the full size RO to a higher level of
filtration. It is an excellent selection for reef enthusiasts
and other serious aquarists, especially those who live in areas
with exceptionally high levels of phosphates in their tap water.
Our unit includes: sediment pre-filters, carbon pre-filters and
TFC (Thin Film Composite) membrane, Deionization (DI)
post-filters in clear housings. The post deionizer takes the
small percentage of contaminants that the membrane could not
remove and filters this to greater than 99.99% pure. It will
give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm
or resistivity of close to 18 meg.ohm (click
here for more
information)
Why do I need RO water ?
Tap water often contains impurities that can cause
problems when added to an aquarium. These include
phosphate, nitrate, chlorine, and various heavy metals.
High levels of phosphate and nitrate fuel aggressive
algae growth, and copper, often present in tap water due
to leaching from pipes, is highly toxic to
invertebrates. Because RO filters remove practically all
of these impurities, they are becoming more popular
among aquarists, particularly marine hobbyists.
Features:
2 x 200GPD Membrane
High Flow Booster Pump
Reverse Osmosis Technologies
Easy to Use and Store
Three Color Coded Tubing For System Connection.
Include Faucet Adaptor For Easy Installation.
100% Factory Tested and Sterilized.
Include Installation Instruction.
Deionization (DI) Filter.
Pressure Gauge
CARTRIDGE FILTERS
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in removing dirt,
rust and sand particles.
(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the chlorine and organic chemicals. It
provides enhanced reduction of taste, odor, and color. Protect
and prolong the life of membrane.
(Stage 3) Carbon Block Filter:
It takes out 99% of the chlorine and organic chemicals. It
provides enhanced reduction of taste, odor, and color. Protect
and prolong the life of membrane.
(Stage 4) Reverse Osmosis Membrane:
It remove the following hard water contaminants that may be
present in your water: lead, cooper, barium, chromium, mercury,
sodium, cadmium, fluoride, nitrite, nitrate, and selenium.
(Stage 5) Deionization (DI) Filter:
Produce 99.99% pure water by simply attaching this convenient
deionization filter with RO unit. Convenient post RO filtration
DI unit (RO/DI unit) provides crucial supplemental filtration to
remove most impurities for pure polished product water.
Excellent in areas with hard water. Produce 99.99% pure water.
It will give you 0 ppm TDS, Conductivity attainable less than
0.1uS/cm or resistivity of close to 18 meg.ohm
Specifications:
Production: 400 GPD / 1512 LPD
Minimum Operation pressure: 10 psi
Available in : 110 volt, 220volt, 240volt. ( 50 / 60 Hz)
Dimensions: (cm)38 (L) x 46 (H) x 25.5 (W) - system
Weight: 13.8 kg - system
PurePro® Aquarium RO/DI Systems